STARTER INTERLOCK SWITCH INSPECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5]

id0119i2104200

Caution

•  Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)

2.  Disconnect the starter interlock switch connector.

3.  Verify that the continuity is as indicated in the table using a tester.

am6zzw00002367

am6xuw00002340

•  If the continuity is not as indicated in the table, replace the starter interlock switch.

(See CLUTCH PEDAL REMOVAL/INSTALLATION [C66M-R].)