REAR TRAILING LINK REMOVAL/INSTALLATION

id021400800100

1.  Remove the wheel and tire. (See WHEEL AND TIRE REMOVAL/INSTALLATION.)

2.  Remove the floor under cover No.1. (See FLOOR UNDER COVER REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

4.  Install in the reverse order of removal. (See Suspension Link Installation Note.)

5.  Inspect the wheel alignment and adjust it if necessary. (See REAR WHEEL ALIGNMENT.)

am6zzw00014904

1	Dynamic damper
2	Rear trailing link installation nut
3	Rear trailing link installation bolt
4	Rear trailing link (See Rear Trailing Link Installation Note.)

Suspension Link Installation Note

1.  When installing the joint section with a rubber bushing, perform the following procedures.

(1)  Temporarily tighten the nut with the vehicle lifted up.

(2)  Lower the vehicle to the ground and tighten the nut to the specified torque.

Rear Trailing Link Installation Note

1.  Install the rear trailing link installation bolts using a jack.

am6zzw00012932

2.  Install the rear trailing link installation nut.