AIR MIX ACTUATOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]

id0740a1802400

L.H.D.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

Driver-side

1.  Remove the following parts:

(1)  Driver-side side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(2)  Driver-side front heat duct (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am6zzw00010691

3.  Remove the screws.

4.  Remove the driver-side air mix actuator.

5.  Install in the reverse order of removal.

Passenger-side

1.  Remove the following parts:

(1)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(2)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(3)  Passenger-side side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(4)  Passenger-side front heat duct (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am6zzw00010692

3.  Remove the screws.

4.  Remove the passenger-side air mix actuator.

5.  Install in the reverse order of removal.

R.H.D.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

Driver-side

1.  Remove the following parts:

(1)  Driver-side side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(2)  Driver-side front heat duct (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am6zzw00010693

3.  Remove the screws.

4.  Remove the driver-side air mix actuator.

5.  Install in the reverse order of removal.

Passenger-side

1.  Remove the following parts:

(1)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(2)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(3)  Passenger-side side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(4)  Passenger-side front heat duct (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am6zzw00010694

3.  Remove the screws.

4.  Remove the passenger-side air mix actuator.

5.  Install in the reverse order of removal.