DTC B1D19:79 [CONNECTIVITY MASTER UNIT]

id0902n7106100

Description

CD player or DVD/CD player disc read error

Detection condition

•  With the ignition switched ON (engine off or on), the connectivity master unit (CMU) detects a disc read error.

Fail-safe function

Eject a disc.

Possible cause

Caution

•  An unexpected load is applied to the CD player or DVD/CD player causing the output of a DTC due to the way the user uses the CD player or DVD/CD player, such as intentionally holding onto a disc when inserting it. The orientation of the disc should be checked before inserting it and it should be released from the fingers as soon as the disc begins to be read.

•  Use of incompatible disc

•  CD player or DVD/CD player internal malfunction

System wiring diagram

Not applicable

Description	CD player or DVD/CD player disc read error
Detection condition	• With the ignition switched ON (engine off or on), the connectivity master unit (CMU) detects a disc read error.
Fail-safe function	Eject a disc.
Possible cause	Caution • An unexpected load is applied to the CD player or DVD/CD player causing the output of a DTC due to the way the user uses the CD player or DVD/CD player, such as intentionally holding onto a disc when inserting it. The orientation of the disc should be checked before inserting it and it should be released from the fingers as soon as the disc begins to be read. • Use of incompatible disc • CD player or DVD/CD player internal malfunction
System wiring diagram	Not applicable

Step

Inspection

Action

1

INSPECT CD PLAYER OR DVD/CD PLAYER

•  Clear the DTC for the connectivity master unit (CMU) using the M-MDS.
(See CLEARING DTC [CONNECTIVITY MASTER UNIT].)

•  Perform diagnostic assist code “01” CD player or DVD/CD player inspection.
(See DIAGNOSTIC ASSIST FUNCTION [CONNECTIVITY MASTER UNIT].)

•  Perform the DTC inspection for the connectivity master unit (CMU) using the M-MDS.
(See DTC INSPECTION [CONNECTIVITY MASTER UNIT].)

•  Is the same DTC displayed?

Yes

Replace the CD player or DVD/CD player, then go to the next step.

(See CD PLAYER REMOVAL.)

(See CD PLAYER INSTALLATION.)

(See DVD/CD PLAYER REMOVAL.)

(See DVD/CD PLAYER INSTALLATION.)

No

Go to the next step.

2

VERIFY OTHER DTCs

•  Are any other DTCs displayed?

Yes

Repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC TABLE [CONNECTIVITY MASTER UNIT].)

No

DTC troubleshooting completed.

Step	Inspection		Action
1	INSPECT CD PLAYER OR DVD/CD PLAYER • Clear the DTC for the connectivity master unit (CMU) using the M-MDS. (See CLEARING DTC [CONNECTIVITY MASTER UNIT].) • Perform diagnostic assist code “01” CD player or DVD/CD player inspection. (See DIAGNOSTIC ASSIST FUNCTION [CONNECTIVITY MASTER UNIT].) • Perform the DTC inspection for the connectivity master unit (CMU) using the M-MDS. (See DTC INSPECTION [CONNECTIVITY MASTER UNIT].) • Is the same DTC displayed?	Yes	Replace the CD player or DVD/CD player, then go to the next step. (See CD PLAYER REMOVAL.) (See CD PLAYER INSTALLATION.) (See DVD/CD PLAYER REMOVAL.) (See DVD/CD PLAYER INSTALLATION.)
1		No	Go to the next step.
2	VERIFY OTHER DTCs • Are any other DTCs displayed?	Yes	Repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [CONNECTIVITY MASTER UNIT].)
2	VERIFY OTHER DTCs • Are any other DTCs displayed?	No	DTC troubleshooting completed.