DTC U3000:42 [CONNECTIVITY MASTER UNIT]
id0902n7106700
|
Description |
Connectivity master unit (CMU) internal malfunction (poor data read-outs) |
|---|---|
|
Detection condition
|
• The connectivity master unit (CMU) cannot read data from the NVRAM in the connectivity master unit (CMU) with the ignition switched to ACC or ON (engine off or on).
|
|
Fail-safe function
|
Not applicable
|
|
Possible cause
|
• Connectivity master unit (CMU) malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING LOCATION IS CONNECTIVITY MASTER UNIT (CMU)
• Clear the DTC for the connectivity master unit (CMU) using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 7 s or more.
• Perform the DTC inspection for the connectivity master unit (CMU) using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the connectivity master unit (CMU).
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning location according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||