REAR SEAT WARMER SWITCH REMOVAL/INSTALLATION

id091300701600

1.  Disconnect the negative battery cable. (with rear seat warmer system) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  While pressing the cup holder tabs in the direction of the arrows shown in the figure, lift up the cup holder to detach the cup holder tabs from the rear seat center armrest.

am6zzw00013749

3.  Disconnect the connector and remove the cup holder.

am6zzw00013750

4.  Remove the screws.

am6zzw00013751

5.  Remove the rear seat warmer switch.

6.  Install in the reverse order of removal.