REAR SEAT CUSHION TRIM REMOVAL/INSTALLATION

id091300912700

Caution

•  When removing or putting in the rear seat cushion, contact with the surrounding areas of the vehicle could cause scratches and damage. When removing or putting in the rear seat cushion, always use two or more persons to perform the work and be careful not to scratch or damage the rear seat cushion and the surrounding area of the vehicle.

•  When performing the procedure with a rear seat cushion removed from the vehicle, perform the procedure on a clean cloth so as not to damage or soil the seat.

Removal

1.  Disconnect the negative battery cable. (with rear seat warmer system) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

3.  Remove the C-rings.

am6zzw00012452

Caution

•  If a C-ring is damaged while removing or installing the rear seat cushion trim and rear seat cushion pad, it may not be possible to install the rear seat cushion trim and rear seat cushion pad normally. When removing or installing the rear seat cushion trim and rear seat cushion pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

4.  Remove C-rings in the order of (1), (2), (3), (4), and (5) shown in the figure, and remove the rear seat cushion trim from the rear seat cushion pad.

am6zzw00014529

Caution

•  If a C-ring is damaged while removing or installing the rear seat cushion trim and rear seat cushion pad, it may not be possible to install the rear seat cushion trim and rear seat cushion pad normally. When removing or installing the rear seat cushion trim and rear seat cushion pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

Installation

1.  Align the rear seat cushion trim with the installation hole of the rear seat cushion pad, and install the C-rings in the order of (1), (2), (3), (4), and (5) shown in the figure.

Caution

•  If a C-ring is damaged while removing or installing the rear seat cushion trim and rear seat cushion pad, it may not be possible to install the rear seat cushion trim and rear seat cushion pad normally. When removing or installing the rear seat cushion trim and rear seat cushion pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

Note

•  Wrinkling can be easily prevented by installing the C-rings with a certain amount of tightening.

ac5wzw00007047

am6zzw00014530

2.  Press the rear seat cushion pad inward while pulling the rear seat cushion trim outward.

ac5wzw00007048

3.  Align the rear seat cushion trim with the installation hole of the rear seat cushion pad, and install the C-rings.

Caution

•  If a C-ring is damaged while removing or installing the rear seat cushion trim and rear seat cushion pad, it may not be possible to install the rear seat cushion trim and rear seat cushion pad normally. When removing or installing the rear seat cushion trim and rear seat cushion pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

Note

•  Wrinkling can be easily prevented by installing the C-rings with a certain amount of tightening.

ac5wzw00007047

am6zzw00012529

4.  Align the rear seat cushion trim with the shape of the rear seat cushion pad while pressing the rear seat cushion pad outward.

am6zzw00012539

5.  Install the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

6.  Connect the negative battery cable. (with rear seat warmer system) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)