SUNROOF SYSTEM INITIALIZATION PROCEDURE

id091500858000

• If the following operations have been performed, the initial setting is reset, and operations except for tilt up are disabled. Therefore, performing initial setting is necessary.

― Negative battery cable is disconnected. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)

― Sunroof switch connector is disconnected.

― Sunroof system power supply fuse is removed.

1. Switch the ignition ON (engine off or on).

2. Press the tilt up switch to fully tilt up the glass panel.