TRUNK LID GARNISH REMOVAL/INSTALLATION

id091600816100

1.  Insert a tape-wrapped flathead screwdriver under caps A shown in the figure and remove caps A in the direction of arrow (1).

am6zzw00010331

2.  Insert a tape-wrapped flathead screwdriver under caps B shown in the figure and remove cap B in the direction of arrow (2).

am6zzw00010332

3.  Remove bolts C.

am6zzw00010333

4.  Insert a tape-wrapped flathead screwdriver into clips D and guides E shown in the figure and remove clips D and guides E in the direction of the arrows in the order of (3), (4).

am6zzw00010334

5.  Pull the trunk lid garnish in the direction of the arrow (4) and remove it while detaching clips F.

am6zzw00010335

6.  Install in the reverse order of removal.