CLUSTER SWITCH REMOVAL/INSTALLATION

id091700460800

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)

2.  Remove the front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

3.  Remove the front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

4.  Remove bolt.

am6xuw00007488

5.  Pull the driver-side lower panel in the direction of the arrow in the order of (1), (2) while detaching hook, clips and tabs.

am6xuw00007489

6.  Set the driver-side lower panel aside.

7.  Remove hooks in the direction of the arrow in the order of (1), (2) shown in the figure.

am6xuw00007491

8.  Disconnect the cluster switch connector.

9.  Install in the reverse order of removal.