LIGHTING SYSTEM PERSONALIZATION

id091800013300

Caution

• The personalization feature may not be set correctly if [Not Adopted.] or [Not equipped] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not Adopted.] or [Not equipped] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).

Note

• Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.

• A personalization function has been adopted with which settings for each function can be changed.

• There are two types of customization procedures; one using the Mazda Modular Diagnostic System (M-MDS) or the center display (with center display) and the other using the light switch or the center display (with center display). Refer to the workshop manual for the detailed setting procedure.

Turn Light System

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Three-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

ON (Australian, European (L.H.D. U.K.), Israel specs.)/
OFF (Except Australian, European (L.H.D. U.K.), Israel specs.)

OFF/ON

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Three-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	ON (Australian, European (L.H.D. U.K.), Israel specs.)/ OFF (Except Australian, European (L.H.D. U.K.), Israel specs.)	OFF/ON	Rear body control module (RBCM)

Using Center Display

Display of center display

Function

Initial setting

Setting contents

Control module

3-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

On (Australian, European (L.H.D. U.K.), Israel specs.)/
Off (Except Australian, European (L.H.D. U.K.), Israel specs.)

On/Off

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Setting contents	Control module
3-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	On (Australian, European (L.H.D. U.K.), Israel specs.)/ Off (Except Australian, European (L.H.D. U.K.), Israel specs.)	On/Off	Rear body control module (RBCM)

Auto Light System

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Auto-headlight On.

Auto light sensor sensitivity can be changed.

Medium

Dark/Medium Dark/Medium/Medium Light/Light

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Auto-headlight On.	Auto light sensor sensitivity can be changed.	Medium	Dark/Medium Dark/Medium/Medium Light/Light	Rear body control module (RBCM)

Using Center Display

Display of center display

Function

Initial setting

Setting contents

Control module

Auto Headlight On

Auto light sensor sensitivity can be changed.

Medium

Light/Medium Light/Medium/Medium Dark/Dark

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Setting contents	Control module
Auto Headlight On	Auto light sensor sensitivity can be changed.	Medium	Light/Medium Light/Medium/Medium Dark/Dark	Rear body control module (RBCM)

Note

• If the mode is set to [Light] and [Medium Light], the illuminance level for turning on the headlight LO, TNS, and panel light increases. Therefore, each light turns on when the ambient light is brighter than when the level is set to [Medium]. In addition, if the mode is set to [Dark] or [Medium Dark], the illuminance level for turning on the headlight LO, TNS, and panel light decreases. Therefore, each light turns on when the ambient light is darker than when the level is set to [Medium].

• The auto light sensitivity setting turns on/off the headlight LO, TNS, and panel light according to the following illumination levels.

Note

• The following illumination level is a reference. It varies depending on conditions in the surrounding area (weather, reflection off buildings).

Setting contents

Lights on operation

Lights off operation

Panel light On

Panel light On

Panel light On

Panel light Off

TNS Off

TNS On

TNS Off

TNS Off

Headlight LO Off

Headlight LO On

Headlight LO Off

Headlight LO Off

Light

1,000 lux

4,000 lux

8,000 lux

2,000 lux

Medium Light

850 lux

3,000 lux

6,000 lux

1,700 lux

Medium

700 lux

2,000 lux

4,000 lux

1,400 lux

Medium Dark

550 lux

1,000 lux

2,000 lux

1,100 lux

Dark

400 lux

500 lux

1,000 lux

800 lux

Coming Home Light System

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Coming Home Light operation time

The coming home light system operation time can be switched.

30 seconds.

0 seconds. / 30 seconds. / 60 seconds. / 90 seconds. / 120 seconds.

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Coming Home Light operation time	The coming home light system operation time can be switched.	30 seconds.	0 seconds. / 30 seconds. / 60 seconds. / 90 seconds. / 120 seconds.	Rear body control module (RBCM)

Using Center Display

Display of center display

Function

Initial setting

Setting contents

Control module

Coming Home Lights Timer

The coming home light system operation time can be switched.

30 seconds

Off/30 seconds/60 seconds/90 seconds/120 seconds

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Setting contents	Control module
Coming Home Lights Timer	The coming home light system operation time can be switched.	30 seconds	Off/30 seconds/60 seconds/90 seconds/120 seconds	Rear body control module (RBCM)

Leaving Home Light System

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Leaving Home Light system

The leaving home light system can be switched between operable and inoperable.

Off (except European (L.H.D. U.K.) specs.)/
On (European (L.H.D. U.K.) specs.)

Off / On

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Leaving Home Light system	The leaving home light system can be switched between operable and inoperable.	Off (except European (L.H.D. U.K.) specs.)/ On (European (L.H.D. U.K.) specs.)	Off / On	Rear body control module (RBCM)

Using Center Display

Display of center display

Function

Initial setting

Setting contents

Control module

Leaving Home Lights

The leaving home light system can be switched between operable and inoperable.

Off (except European (L.H.D. U.K.) specs.)/
On (European (L.H.D. U.K.) specs.)

On / Off

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Setting contents	Control module
Leaving Home Lights	The leaving home light system can be switched between operable and inoperable.	Off (except European (L.H.D. U.K.) specs.)/ On (European (L.H.D. U.K.) specs.)	On / Off	Rear body control module (RBCM)

Room Light Control System

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Interior Light Timeout - Door Open.

• The front/rear map light and courtesy light illumination time after any door is open can be changed.

• The trunk compartment light (4SD)/cargo compartment light (WGN) illumination time after trunk lid (4SD)/liftgate (WGN) is open can be changed.

30 minutes.

30 minutes./60 minutes./10 minutes.

Rear body control module (RBCM)

Interior Light Timeout - Door Closed.

The front/rear map light and courtesy light illumination time after all door is closed can be changed.

15 seconds.

15 seconds./7.5 seconds./30 seconds./60 seconds.

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Interior Light Timeout - Door Open.	• The front/rear map light and courtesy light illumination time after any door is open can be changed. • The trunk compartment light (4SD)/cargo compartment light (WGN) illumination time after trunk lid (4SD)/liftgate (WGN) is open can be changed.	30 minutes.	30 minutes./60 minutes./10 minutes.	Rear body control module (RBCM)
Interior Light Timeout - Door Closed.	The front/rear map light and courtesy light illumination time after all door is closed can be changed.	15 seconds.	15 seconds./7.5 seconds./30 seconds./60 seconds.	Rear body control module (RBCM)

Using Center Display

Display of center display

Function

Initial setting

Setting contents

Control module

Interior Light Timeout - Door Open

• The front/rear map light and courtesy light illumination time after any door is open can be changed.

• The trunk compartment light (4SD)/cargo compartment light (WGN) illumination time after trunk lid (4SD)/liftgate (WGN) is open can be changed.

30 minutes

60 minutes/30 minutes/10 minutes

Rear body control module (RBCM)

Interior Light Timeout - Door Closed

The front/rear map light and courtesy light illumination time after all door is closed can be changed.

15 seconds

60 seconds/30 seconds/15 seconds/7.5 seconds

Rear body control module (RBCM)

Interior Lightning Brightness

The down light brightness can be changed when the TNS (parking lights) are turned on.

Medium

Bright / Medium / Dark / Off

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Setting contents	Control module
Interior Light Timeout - Door Open	• The front/rear map light and courtesy light illumination time after any door is open can be changed. • The trunk compartment light (4SD)/cargo compartment light (WGN) illumination time after trunk lid (4SD)/liftgate (WGN) is open can be changed.	30 minutes	60 minutes/30 minutes/10 minutes	Rear body control module (RBCM)
Interior Light Timeout - Door Closed	The front/rear map light and courtesy light illumination time after all door is closed can be changed.	15 seconds	60 seconds/30 seconds/15 seconds/7.5 seconds	Rear body control module (RBCM)
Interior Lightning Brightness	The down light brightness can be changed when the TNS (parking lights) are turned on.	Medium	Bright / Medium / Dark / Off	Rear body control module (RBCM)

Running Light System (Australian specs.)

Using Light Switch

Note

• Refer to the workshop manual for the detailed setting procedure.

Function

Initial setting

Setting contents

Control module

The running light system function can be set.

ON (running light illumination)

OFF (running light non-illumination)/ON (running light illumination)

Front body control module (FBCM)

Function	Initial setting	Setting contents	Control module
The running light system function can be set.	ON (running light illumination)	OFF (running light non-illumination)/ON (running light illumination)	Front body control module (FBCM)

Using Center Display

Display of center display

Function

Initial setting

Setting contents

Control module

Daytime Running Lights

The running light system function can be set.

On

On / Off

Front body control module (FBCM)

Setting contents	Lights on operation		Lights off operation
	Panel light On	Panel light On	Panel light On	Panel light Off
	TNS Off	TNS On	TNS Off	TNS Off
	Headlight LO Off	Headlight LO On	Headlight LO Off	Headlight LO Off
Light	1,000 lux	4,000 lux	8,000 lux	2,000 lux
Medium Light	850 lux	3,000 lux	6,000 lux	1,700 lux
Medium	700 lux	2,000 lux	4,000 lux	1,400 lux
Medium Dark	550 lux	1,000 lux	2,000 lux	1,100 lux
Dark	400 lux	500 lux	1,000 lux	800 lux