LICENSE PLATE LIGHT BULB REMOVAL/INSTALLATION

id091800857800

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure.

am6zzw00012824

3.  Move the flathead screwdriver in the direction of the arrows (1) shown in the figure, and pull the lens in the direction of the arrow (2) shown in the figure to detach the license plate light tabs from the lens.

am6zzw00008119

4.  Remove the lens.

am6zzw00008120

5.  Remove the license plate light bulb.

6.  Install in the reverse order of removal.