CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE

id094000439800

Caution

• The personalization feature may not be set correctly if [Not Adopted.] or [Not equipped] is selected in the setting displayed on the M-MDS. Do not select [Not Adopted.] or [Not equipped] in the setting displayed on the M-MDS.

Note

• Settings of some personalization features displayed on the M-MDS cannot be switched depending on the vehicle specification.

Rear Window Defogger System

Rear window defogger system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the F_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Rear Defogger operating time

The operation time for the rear window defogger can be changed.

15 minutes

15 minutes / Continuous

Front body control module (FBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Rear Defogger operating time	The operation time for the rear window defogger can be changed.	15 minutes	15 minutes / Continuous	Front body control module (FBCM)

Door Lock System

Power door lock system (Except Australian, European (L.H.D. U.K.) specs.) (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Auto Door Lock Mode.

Auto door lock function can be changed.

Lock: Driving, Unlock: IGN Off.

OFF / Lock When Driving. / Lock: Driving, Unlock: IGN Off. / Lock When Shifting Out Of P. / Lock: Shift From P, Unlock: In P.

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Auto Door Lock Mode.	Auto door lock function can be changed.	Lock: Driving, Unlock: IGN Off.	OFF / Lock When Driving. / Lock: Driving, Unlock: IGN Off. / Lock When Shifting Out Of P. / Lock: Shift From P, Unlock: In P.	Rear body control module (RBCM)

Power door lock system (Except Australian, European (L.H.D. U.K.) specs.) (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Power door lock system (Except Australian, European (L.H.D. U.K.) specs.) (Setting method by operation of door lock switch)

• The following setting can be changed by operation of the door lock switch.

M-MDS display	Function	Initial setting	Setting contents	Control unit
Auto Door Lock Mode.	Auto door lock function can be changed.	Lock: Driving, Unlock: IGN Off.	OFF / Lock When Driving. / Lock: Driving, Unlock: IGN Off. / Lock When Shifting Out Of P. / Lock: Shift From P, Unlock: In P. / Lock: When Driving, Unlock: In Park.	Rear body control module (RBCM)

• Change the setting for the auto door lock referring to the following procedure:

Note

• If any of the following conditions is met during procedure, the setting change for the auto door lock is stopped.

― Lock side of the door lock switch is pressed while in the personalization mode.

― Unlock side of the door lock switch is pressed 7 times while in the personalization mode. (ATX)

― Unlock side of the door lock switch is pressed 4 times while in the personalization mode. (MTX)

am6zzw00013083

Lighting Systems

Turn light system (Australian, European (L.H.D. U.K.), Israel specs.) (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Three-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

ON

OFF / ON

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Three-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	ON	OFF / ON	Rear body control module (RBCM)

Turn light system (Australian, European (L.H.D. U.K.), Israel specs.) (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Turn light system (Except Australian, European (L.H.D. U.K.), Israel specs.) (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Three-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

OFF

OFF / ON

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Three-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	OFF	OFF / ON	Rear body control module (RBCM)

Turn light system (Except Australian, European (L.H.D. U.K.), Israel specs.) (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Auto light system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Auto-headlight On.

Auto light sensor sensitivity can be changed.

Medium

Dark / Medium Dark / Medium / Medium Light/Light

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Auto-headlight On.	Auto light sensor sensitivity can be changed.	Medium	Dark / Medium Dark / Medium / Medium Light/Light	Rear body control module (RBCM)

Auto light system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Headlight system (European (L.H.D. U.K.) specs.) (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Coming Home Light operation time

The coming home light system operation time can be switched.

30 seconds.

0 seconds. / 30 seconds. / 60 seconds. / 90 seconds. / 120 seconds.

Rear body control module (RBCM)

Leaving Home Light system

The leaving home light system can be switched between operable and inoperable.

On

Off / On

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Coming Home Light operation time	The coming home light system operation time can be switched.	30 seconds.	0 seconds. / 30 seconds. / 60 seconds. / 90 seconds. / 120 seconds.	Rear body control module (RBCM)
Leaving Home Light system	The leaving home light system can be switched between operable and inoperable.	On	Off / On	Rear body control module (RBCM)

Headlight system (European (L.H.D. U.K.) specs.) (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Headlight system (Except European (L.H.D. U.K.) specs.) (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display	Function	Initial setting	Setting contents	Control unit
Coming Home Light operation time	The coming home light system operation time can be switched.	30 seconds.	0 seconds. / 30 seconds. / 60 seconds. / 90 seconds. / 120 seconds.	Rear body control module (RBCM)
Leaving Home Light system	The leaving home light system can be switched between operable and inoperable.	Off	Off / On	Rear body control module (RBCM)

Headlight system (Except European (L.H.D. U.K.) specs.) (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Room light control system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Interior Light Timeout-Door Open.

The front/rear map light illumination time after any door is open can be changed.

30 minutes.

30 minutes. / 60 minutes. / 10 minutes.

Rear body control module (RBCM)

Interior Light Timeout-Door Closed.

The front/rear map light illumination time after all door are closed can be changed.

15 seconds.

15 seconds. / 7.5 seconds. / 30 seconds. / 60 seconds.

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Interior Light Timeout-Door Open.	The front/rear map light illumination time after any door is open can be changed.	30 minutes.	30 minutes. / 60 minutes. / 10 minutes.	Rear body control module (RBCM)
Interior Light Timeout-Door Closed.	The front/rear map light illumination time after all door are closed can be changed.	15 seconds.	15 seconds. / 7.5 seconds. / 30 seconds. / 60 seconds.	Rear body control module (RBCM)

Room light control system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Wiper/washer System

Auto wiper system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the "Module Programming".

• Select "Programmable Parameters".

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Rain Sensing Wipers.

The auto wiper function can be disabled.

On (Rain Sensing)

Off (Intermittent)^*1 / On (Rain Sensing)

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Rain Sensing Wipers.	The auto wiper function can be disabled.	On (Rain Sensing)	Off (Intermittent)^*1 / On (Rain Sensing)	Rear body control module (RBCM)

*1 :If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.

Auto wiper system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)