DTC U0010:88/U0100:00/U0155:00/U0214:00 [BLIND SPOT MONITORING (BSM) CONTROL MODULE (Australian specs.)]

id1502b7004900

Description	•  U0010:88 ―  Module communication error (MS-CAN) •  U0100:00 ―  Communication error with PCM •  U0155:00 ―  Communication error with instrument cluster •  U0214:00 ―  Communication error with start stop unit
Detection condition	•  U0010:88 ―  Blind spot monitoring (BSM) control module detected a CAN bus communication line (MS-CAN) malfunction for 1.4 s or more. •  U0100:00 ―  Blind spot monitoring (BSM) control module cannot receive a CAN signal from the PCM for 5 s or more. •  U0155:00 ―  Blind spot monitoring (BSM) control module cannot receive a CAN signal from the instrument cluster. •  U0214:00 ―  Blind spot monitoring (BSM) control module cannot receive a CAN signal from the start stop unit for 5 s or more.
Fail-safe	•  U0010:88 ―  Blind spot monitoring (BSM) system is stopped. •  U0100:00 ―  Blind spot monitoring (BSM) system is stopped. •  U0155:00 ―  Blind spot monitoring (BSM) system is stopped. •  U0214:00 ―  Blind spot monitoring (BSM) system is stopped.
Possible cause	•  Malfunction in CAN bus communication line •  Malfunction in CAN communication line between PCM and blind spot monitoring (BSM) control module ―  Instrument cluster communication error (vehicle speed signal is not sent via instrument cluster from PCM) •  Malfunction in CAN communication line between instrument cluster and blind spot monitoring (BSM) control module •  Malfunction in CAN communication line between start stop unit and blind spot monitoring (BSM) control module ―  Instrument cluster communication error (turn switch signal is not sent via instrument cluster from start stop unit)
System wiring diagram	Not applicable

Diagnostic Procedure