i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE

id152000001200

Caution

• The personalization feature may not be set correctly if [Not Adopted.] is selected in the setting displayed on the M-MDS. Do not select [Not Adopted.] in the setting displayed on the M-MDS.

Distance Recognition Support System (DRSS)

Using center display

• For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

High Beam Control (HBC) System

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming“

(2) “Programmable Parameters”

3. Select menu in the “FSC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

High Beam Control.

The high beam control (HBC) system can be switched between operable and inoperable.

ON

OFF / ON

Forward sensing camera (FSC)

M-MDS display	Function	Initial setting	Setting contents	Control unit
High Beam Control.	The high beam control (HBC) system can be switched between operable and inoperable.	ON	OFF / ON	Forward sensing camera (FSC)

Using center display

Lane-keep Assist System / Lane Departure Warning System (LDWS)

Using M-MDS (FSC)

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming“

(2) “Programmable Parameters”

3. Select menu in the “FSC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

LDWS Timing.

The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.

Late

Adaptive / Early / Medium / Late

Forward sensing camera (FSC)

LDWS Warning.

The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.

Often

Often / Medium / Rare

Forward sensing camera (FSC)

LDWS Alart

The operation of lane departure warning system (LDWS) can be turned off.

ON

OFF / ON

Forward sensing camera (FSC)

LDWS LKA MODE

The function of lane departure warning system (LDWS) / lane-keep assist system can be switched.

LKA

OFF / LKA / LDWS

Forward sensing camera (FSC)

LKA Sensitibity

The operation timing of lane-keep assist system warning can be changed.

AUTO

AUTO*1 / Near / Med / Far

Forward sensing camera (FSC)

LKA Cancel Sensitibity

The warning operation sensitivity of lane-keep assist system warning can be changed.

Med

HI / Med HI / Med / LO / LO

Forward sensing camera (FSC)

M-MDS display	Function	Initial setting	Setting contents	Control unit
LDWS Timing.	The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.	Late	Adaptive / Early / Medium / Late	Forward sensing camera (FSC)
LDWS Warning.	The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.	Often	Often / Medium / Rare	Forward sensing camera (FSC)
LDWS Alart	The operation of lane departure warning system (LDWS) can be turned off.	ON	OFF / ON	Forward sensing camera (FSC)
LDWS LKA MODE	The function of lane departure warning system (LDWS) / lane-keep assist system can be switched.	LKA	OFF / LKA / LDWS	Forward sensing camera (FSC)
LKA Sensitibity	The operation timing of lane-keep assist system warning can be changed.	AUTO	AUTO*1 / Near / Med / Far	Forward sensing camera (FSC)
LKA Cancel Sensitibity	The warning operation sensitivity of lane-keep assist system warning can be changed.	Med	HI / Med HI / Med / LO / LO	Forward sensing camera (FSC)

^*1:When AUTO is selected, the lane-keep assist system warning is activated at the timing of the Med warning.

Using M-MDS (Instrument cluster)

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

LDWS Sound.

The type of the lane departure warning sound can be changed.

Beep

Beep / Rumble

Instrument cluster

LDWS Volume.

The volume of the lane departure warning alarm can be changed.

Volume1

Not Adopted./ Volume1 / Volume2 / Volume3

Instrument cluster

M-MDS display	Function	Initial setting	Setting contents	Control unit
LDWS Sound.	The type of the lane departure warning sound can be changed.	Beep	Beep / Rumble	Instrument cluster
LDWS Volume.	The volume of the lane departure warning alarm can be changed.	Volume1	Not Adopted./ Volume1 / Volume2 / Volume3	Instrument cluster

Using center display

Adaptive Front Lighting System (AFS)

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Adaptive Front-lighting System

The adaptive front lighting system (AFS) can be switched between operable and inoperable.

ON

OFF / ON

Adaptive front lighting system (AFS) control module

M-MDS display	Function	Initial setting	Setting contents	Control unit
Adaptive Front-lighting System	The adaptive front lighting system (AFS) can be switched between operable and inoperable.	ON	OFF / ON	Adaptive front lighting system (AFS) control module

Using center display

Blind Spot Monitoring (BSM) System

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

BSM Volume.

The volume of the blind spot monitoring (BSM) warning alarm can be changed.

High

OFF / Low / High

Instrument cluster

BSM OFFON

The operation of blind spot monitoring (BSM) system can be turned off.

ON

OFF / ON

Instrument cluster

M-MDS display	Function	Initial setting	Setting contents	Control unit
BSM Volume.	The volume of the blind spot monitoring (BSM) warning alarm can be changed.	High	OFF / Low / High	Instrument cluster
BSM OFFON	The operation of blind spot monitoring (BSM) system can be turned off.	ON	OFF / ON	Instrument cluster

Using center display

Smart City Brake Support [Forward/Reverse] (SCBS F/R)

Using center display

Smart Brake Support (SBS) / Advanced Smart City Brake Support (Advanced SCBS)

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Smart Brake Support Volume.

The volume of the smart brake support (SBS) warning alarm can be changed.

High

OFF / Low / High

Instrument cluster

SCBS Sensitibity

The distance at which the collision warning activates can be changed.

Med

Long/Med/Short

Instrument cluster

M-MDS display	Function	Initial setting	Setting contents	Control unit
Smart Brake Support Volume.	The volume of the smart brake support (SBS) warning alarm can be changed.	High	OFF / Low / High	Instrument cluster
SCBS Sensitibity	The distance at which the collision warning activates can be changed.	Med	Long/Med/Short	Instrument cluster

Using center display

Driver Attention Alert

Using center display

Adaptive LED Headlights System

Using center display

Traffic Sign Recognition System (TSR)

Using center display