FUEL-FILLER PIPE REMOVAL/INSTALLATION [SKYACTIV-D 2.2]

id0114z7806900

Warning

• Fuel is highly flammable and dangerous. Fuel line spills and leakage can cause serious injury or death, and damage to equipment. If fuel comes into contact with the skin and eyes it will cause irritation. To prevent this, always perform the “Fuel Line Safety Procedure” referring to the “BEFORE REPAIR PROCEDURE”.

• A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before draining fuel, make sure to discharge static electricity by touching a vehicle.

1. Level the vehicle.

2. Complete the “BEFORE SERVICE PRECAUTION”. (See BEFORE SERVICE PRECAUTION [SKYACTIV-D 2.2].)

3. Drain the fuel. (See FUEL DRAINING PROCEDURE [SKYACTIV-D 2.2].)

4. Open the fuel-filler lid.

5. Remove in the order shown in the figure.

2WD

am6zzw00014549

1

Fuel-filler cap

2

Dust cover

(See Dust Cover Removal Note.)

3

Breather hose

(See Breather Hose Installation Note.)

4

Joint hose

(See Joint Hose Installation Note.)

5

Fuel-filler pipe

(See Fuel-filler Pipe Removal Note.)

6

Fuel-filler pipe protector

7

Evaporative hose

4WD

am6zzw00013115

6. Install in the reverse order of removal.

7. Complete the “AFTER SERVICE PRECAUTION”. (See AFTER SERVICE PRECAUTION [SKYACTIV-D 2.2].)

Dust Cover Removal Note

1. Remove the rear mudguard (LH). (See MUDGUARD REMOVAL/INSTALLATION.)

2. Release the dust cover tab using a flathead screwdriver as shown in the figure.

am6zzw00010394

3. Remove the dust cover.

Fuel-filler Pipe Removal Note

1. Remove the rear tire (LH). (See WHEEL AND TIRE SPECIFICATION.)

2. Remove the rear crossmember. (See REAR CROSSMEMBER REMOVAL/INSTALLATION [2WD].) (See REAR CROSSMEMBER REMOVAL/INSTALLATION [4WD].)

3. Remove the fuel-filler pipe.

Joint Hose Installation Note

1. Connect the joint hose to the fuel-filler pipe as shown in the figure.

am6zzw00010395

Breather Hose Installation Note

1. Align the marking and connect the breather hose to the fuel-filler pipe as shown in the figure.

am6zzw00010396

1	Fuel-filler cap
2	Dust cover (See Dust Cover Removal Note.)
3	Breather hose (See Breather Hose Installation Note.)
4	Joint hose (See Joint Hose Installation Note.)
5	Fuel-filler pipe (See Fuel-filler Pipe Removal Note.)
6	Fuel-filler pipe protector
7	Evaporative hose