POWER STEERING MALFUNCTION INDICATOR LIGHT
id061300245300
Purpose
• The power steering malfunction indicator light warns the driver that there is a malfunction with the Electric Power Steering (EPS) system.
Function
• If there is a malfunction in the EPS system, the power steering malfunction indicator light illuminates.
• If the EPS system and CAN lines are normal, it illuminates when the ignition is switched ON (engine off), and turns off after the engine is started.
Construction
• The power steering malfunction indicator light is built into the instrument cluster.
Operation
EPS system malfunction detection
• If the EPS Control Module (CM) detects a system malfunction, it sends a power steering malfunction indicator light illumination on request signal to the instrument cluster via CAN.
• The instrument cluster illuminates the power steering malfunction indicator light when it receives a power steering malfunction indicator light illumination on request signal.
-
Note
-
• A warning message in the center display is displayed with the power steering malfunction indicator light turned on or flashed. For the message content and verification method, refer to the CENTER DISPLAY [WITH CENTER DISPLAY]. (See
CENTER DISPLAY [WITH CENTER DISPLAY].)
Initial check (without multi-information display)
• If the EPS system and CAN lines are normal, it illuminates when the ignition is switched ON (engine off), and turns off after the engine is started. If there is a system malfunction, the power steering malfunction indicator light illuminates.
Fail-safe
• Function not equipped.
