CENTER DISPLAY [WITH CENTER DISPLAY]


id0920zz113600


Purpose

•  The center display displays entertainment system and vehicle information.

Function

•  The center display displays video images based on the signal sent by the LVDS*1 signal from the connectivity master unit (CMU).
•  The center display is touch-type LCD. The display touch position information is sent by LVDS*1 signal to the CMU.
•  The LVDS communication pathway between the CMU and the center display corresponds to HDCP*2.
*1  :Low-Voltage Differential Signaling indicates the electrical characteristics of the signal. LVDS is a digital, wired transmission technology for the short range which adopts a differential interface having the characteristics of low voltage and low power consumption.
*2  :HDCP (High-bandwidth Digital Content Protection system) is a copyright protection technology which prevents content from being copied fraudulently. The pathway in a display device such as a display, which sends/receives digital signals from a video playback device such as a computer, is encrypted.

Temperature detection function

•  The center display detects temperature using a temperature sensor.
•  The center display converts the temperature detected by the temperature sensor to an electrical signal (LVDS signal) and sends it to the CMU.
Note
•  If the center display receives a temperature warning pop-up screen display request signal (LVDS signal) from the CMU, it displays the temperature warning pop-up screen on the LCD.


Display information

•  The information displayed by the center display is as follows: Refer to the referenced section for details of the displayed information.

Display content

Reference

Home screen
Application screen
Entertainment screen
Communication screen
Navigation screen
Setting screen


Home screen

•  The home screen displays entertainment system information.
•  When the ignition is switched to ACC or ON (engine off or on), the home screen is displayed in the center display.
am3uun00003498

Display area
Button name
1
Applications
2
Entertainment
3
Communication
4
Navigation*3
5
Settings

*3  :With car-navigation system


Applications screen

•  Information concerning fuel economy, maintenance, and warnings can be verified.
am6zzn00004639

Display content

Reference

Fuel Economy Monitor
Vehicle Status Monitor


Fuel Economy Monitor

•  Displays the fuel economy and i-ELOOP system information.
Fuel economy monitor verification procedure
1.  Select the “Applications” button on the Home screen.
2.  Select [Fuel Economy Monitor] on the Applications screen to display the warning guidance.
am6zzn00004639
•  The buttons on the menu screen operate as follows:

Display

Content

1
Switches the menu screen to non-display.
2
Displays the application menu screen.
3
•   Switches the fuel economy monitor display in the following order:
―  Control Status
―  Fuel Consumption
―  Effectiveness
4
Resets the fuel economy data.
5
•  Displays the following setting screen.
―  Ending screen on/off switching
―  On/off switching for function which synchronizes reset fuel economy data to trip meter.

Control Status
•  The i-stop operation status and the i-ELOOP power generating status are displayed.

With i-ELOOP system

Display

Content

Reference

1
Displays the level of electricity generated by regenerative braking.
2
Displays the amount of the electricity stored in the capacitor.
3
Displays the status of the electricity stored in the capacitor and being supplied to the electrical devices (whole vehicle in display is illuminated simultaneously).
4
Displays the accumulated fuel economy.
5
Displays the readiness status as to whether operation of the i-stop function is available.
6
Displays the operation readiness status of the i-stop function on the vehicle side (engine, battery, and A/C) using icon colouring. The blue colour indicates that the i-stop function is ready to operate, and the grey colour indicates that it is not ready for operation.
7
Displays the i-stop function status while the vehicle is stopped.
8
Indicates the operations required by the driver to operate the i-stop function while it is not operating.
9
Time active
•  Current i-stop time is displayed i-stop time at which the i-stop is operating.
Total time
•  i-stop total time is displayed as the total time at which the i-stop has operated.

Without i-ELOOP system

Display

Content

Reference

1
Displays the readiness status as to whether operation of the i-stop function is available.
2
Displays the operation readiness status of the i-stop function on the vehicle side (engine, battery, and A/C) using icon colouring. The blue colour indicates that the i-stop function is ready to operate, and the grey colour indicates that it is not ready for operation.
3
Displays the i-stop function status while the vehicle is stopped.
4
Indicates the operations required by the driver to operate the i-stop function while it is not operating.
5
Time active
•  Current i-stop time is displayed i-stop time at which the i-stop is operating.
Total time
•  i-stop total time is displayed as the total time at which the i-stop has operated.

Fuel Consumption
•  The information regarding the fuel economy is displayed.

Display

Content

Reference

1
•  Displays the fuel economy for the past 60 minutes.
―  Displays the fuel economy every minute for the past 1 to 10 minutes.
―  Displays the fuel economy every 10 minutes for the past 10 to 60 minutes.
2
Displays the average fuel economy over the past 5 resets and after the current reset.
3
•  Displays the average fuel economy from when the ignition is switched ON (engine on) to the current time.
•  The average fuel economy is updated every 60 s.
•  If there is no average fuel economy data, displays “——”.

Effectiveness
•  The actual performance of the energy efficiency is displayed.

With i-ELOOP system and i-stop function

Display

Content

Reference

1
The leaf graphic grows according to the amount of CO2 emissions reduced by the system effects. The cumulative total amount of leaf growth is indicated in terms of the number of tree graphics.
2
Displays the total driving distance which could be extended by the operation of the i-stop function.
3
Displays the percentage of time that the vehicle was stopped by the i-stop function operation out of the total amount of time that the vehicle was stopped.
4
Displays the amount of time that the i-stop function has operated.
5
Displays the total amount of time that the vehicle was stopped.


Warning guidance

•  When the center display receives a warning guidance display signal (LVDS signal) from the CMU, it displays the warning guidance screen.
Note
•  Display method of the warning guidance varies depending on the emergency level.
Pop-up display
―  Warning message of a higher emergency level is displayed on the pop-up screen at the time the warning occurred regardless of the display content of the center display. When “OK” on the pop-up screen is selected, it switches to the previous screen before the pop-up display. The pop-up display warning can also be verified in the warning guidance list.
List display
―  Warning messages displayed by methods other than pop-up display can be verified in the warning guidance screen.
Warning guidance verification procedure
1.  Select the [Applications] button on the Home screen.
2.  Select [Vehicle Status Monitor] on the Applications screen.
am6zzn00004639
3.  Select [Warning Guidance] on the Vehicle Status Monitor screen to display the warning guidance.
am6zzn00004640
4.  Select a desired warning from the warning guidance screen.
am3uun00003489
Note
•  If there is no warning, No Warnings found is displayed on the warning guidance screen.
am3uun00003499

Pop-up display

Screen display

Send module

Reference/function

Pop-up screen

List display

Title

Message

Charging System Malfunction
There is an error in the charging system
Stop car immediately in a safe place, and contact a Mazda dealer.
PCM
i-ELOOP Charging
i-ELOOP Charging.
With the engine running, check that the charging is complete and the warning indicator is off.
PCM
Engine Coolant Temperature High (On)
Engine Coolant Temperature High.
Stop vehicle immediately in a safe place.
Instrument cluster
*4
*4
CMU/center display

*4  :Because the temperature warning is not displayed in the list, it cannot be verified using the list.

List display

Screen display

Send module

Reference/function

Warning light

Title

Message

Low Engine Oil Pressure
Low engine oil pressure.
Stop the vehicle immediately in a safe place, turn off the engine, and inspect the engine oil level. Add oil if necessary.
Have the vehicle checked by a dealer immediately if this indicator turns on after adding oil or the engine oil level is OK.
PCM
i-ELOOP System Malfunction
i-ELOOP system malfunction.
Have the vehicle checked by a dealer if this indicator stays on.
PCM (i-ELOOP)
Low Brake Fluid
Brake fluid level is low.
Stop the vehicle immediately in a safe place and have the vehicle checked by a dealer.
Front body control module (FBCM)
Brake System Malfunction
Electronically-controlled brake system malfunction.
Stop the vehicle immediately in a safe place and have the vehicle checked by a dealer.
DSC HU/CM
Electric parking brake malfunction
Parking Brake System Malfunction.
A malfunction has occurred in the parking brake system.Consult your Mazda Dealer for inspection.
Electric parking brake control module
Electric parking brake malfunction
Electric parking brake malfunction.
If the indicator continues flashing even on operating the electric parking switch, stop the vehicle immediately in a level and safe place and have the vehicle checked by a dealer.
Electric parking brake control module
Low Tire Air Pressure (On)
Low tire air pressure in one or more tires.
Check the air pressure of the tires and adjust to the correct air pressure. Press the TPMS SET switch after adjusting the tire pressure until you hear a beep.
DSC HU/CM
Engine Coolant Temperature High
Engine is starting to run hot.
Drive slowly or stop the vehicle until the indicator stops flashing. If it keeps flashing, even after stopping the vehicle, take proper actions. Refer to the Owner's Manual.
Instrument cluster
Low Fuel
Fuel tank level is low.
Refuel the vehicle soon.
Instrument cluster
Power Steering System Malfunction
Electric power steering malfunction.
Stop the vehicle in a safe place and turn off the engine. Have the vehicle checked by a dealer if this indicator stays on.
EPS control module
Engine System Malfunction
Engine system malfunction.
Have the vehicle checked by a dealer immediately.
PCM
Airbag System/Pretensioner System Malfunction
Airbag/seatbelt malfunction.
Have the vehicle checked by a dealer immediately
SAS control module
ABS Malfunction
Anti-lock brake system (ABS) malfunction.
Have the vehicle checked by a dealer immediately.
DSC HU/CM
DSC Malfunction
Dynamic stability control (DSC) or traction control system (TCS) malfunction.
Have the vehicle checked by a dealer immediately.
DSC HU/CM
BSM Malfunction
Blind spot monitoring (BSM)/Rear cross traffic alert (RCTA) malfunction.
Check for abnormalities in the rear bumper surface and clean if dirty or covered with snow. Have the vehicle checked by a dealer if this indicator stays on.
BSM control module
AFS Malfunction
Adaptive front-lighting system (AFS) malfunction. Have the vehicle checked by a dealer if this indicator keeps flashing.
AFS control module
TPMS System Malfunction
Tire pressure monitoring system (TPMS) malfunction.
Have the vehicle checked by a dealer.
DSC HU/CM
i-Stop System Malfunction
i-stop system mulfunction.
Have the vehicle checked by a dealer.
PCM
Key Battery Low
Key battery is low.
Replace the key battery immediately.
Start stop unit
Keyless Entry Malfunction
Keyless entry system malfunction.
Have the vehicle checked by a dealer.
Start stop unit
Head lamp System Malfunction
Headlight system malfunction.
Have your vehicle checked at a Mazda dealer.
AFS control module/adaptive LED headlights control module/front body control module (FBCM)
Automatic Transmission Malfunction
Automatic transmission malfunction.
Damage to the vehicle may occur if you continue to drive. Have the vehicle checked by a dealer immediately.
TCM
Battery Management System Malfunction
Battery management system malfunction.
Have the vehicle checked by a dealer.
PCM
Brake Override System Malfunction
Brake switch malfunction.
Have the vehicle checked by a dealer immediately.
PCM
SCBS Malfunction
Smart city brake support (SCBS) malfunction.
Have the vehicle checked by a dealer immediately.
FSC
SCBS Malfunction
Smart city brake support (SCBS) malfunction.
Clean the front windshield. Have the vehicle checked by a dealer if this indicator stays on.
FSC
SCBS Unavailable
Smart city brake support (SCBS) currently unavailable.
FSC
MRCC Malfunction
Mazda radar cruise control (MRCC) malfunction.
Have the vehicle checked by a dealer.
Radar unit
SBS Malfunction
Smart brake support (SBS) malfunction.
Have the vehicle checked by a dealer.
Radar unit
DRSS Malfunction
Distance recognition support system (DRSS) malfunction.
Have the vehicle checked by a dealer.
Radar unit
SBS/MRCC Radar Malfunction
SBS/MRCC radar (sensor) malfunction.
Clean the entire surface of the front grill emblem if dirty or covered with snow.
Have the vehicle checked by a dealer if this indicator stays on.
Radar unit
SBS/MRCC/DRSS Radar Malfunction
SBS/MRCC/DRSS radar (sensor) malfunction.
Clean the entire surface of the front grill emblem if dirty or covered with snow.
Have the vehicle checked by a dealer if this indicator stays on.
Radar unit
MRCC Unavailable
Mazda radar cruise control (MRCC) currently unavailable.
Radar unit
SBS Brake Unavailable
Smart brake support (SBS) currently unavailable.
Radar unit
SBS Brake/MRCC Unavailable
SBS/MRCC currently unavailable.
Radar unit
LDWS Malfunction
Lane departure warning system (LDWS) Malfunction.
Have the vehicle checked by a dealer.
FSC
LAS Malfunction
Lane-keep Assist System (LAS) Malfunction.
Have the vehicle checked by a dealer.
FSC
HBC Malfunction
High beam control (HBC) malfunction. Have the vehicle checked by a dealer.
FSC
ALH Malfunction
Adaptive LED Headlights (ALH) malfunction. Have the vehicle checked by a dealer.
FSC
HBC/LDWS Camera Malfunction
High Beam Control (HBC)/Lane departure warning system (LDWS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
HBC/LAS Camera Malfunction
High Beam Control (HBC)/Lane-keep Assist System (LAS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
ALH/LDWS Camera Malfunction
Adaptive LED Headlights (ALH)/Lane departure warning system (LDWS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
ALH/LAS Camera Malfunction
Adaptive LED Headlights (ALH)/Lane-keep Assist System (LAS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
HBC/LDWS System Malfunction
High Beam Control (HBC)/Lane departure warning system (LDWS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
HBC/LAS System Malfunction
High Beam Control (HBC)/Lane-keep Assist System (LAS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
ALH/LDWS System Malfunction
Adaptive LED Headlights (ALH)/Lane departure warning system (LDWS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
ALH/LAS System Malfunction
Adaptive LED Headlights (ALH)/Lane-keep Assist System (LAS) Malfunction.
Clean the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
HBC/LDWS System Malfunction
High beam control (HBC)/Lane departure warning system (LDWS) malfunction.
Defrost the windshield. Have the vehicle checked by a dealer if this indicator stays on.
FSC
HBC/LAS System Malfunction
High Beam Control (HBC)/Lane-keep Assist System (LAS) Malfunction.
Defrost the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
ALH/LDWS System Malfunction
Adaptive LED Headlights (ALH)/Lane Departure Warning System (LDWS) Malfunction.
Defrost the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
ALH/LAS System Malfunction
Adaptive LED Headlights (ALH)/Lane-keep Assist System (LAS) Malfunction.
Defrost the Windshield. Have the vehicle checked by a dealer if this Indicator stays On.
FSC
Vehicle System Malfunction
Vehicle system malfunction.
Have the vehicle checked by a dealer.
PCM
Sedimenter Inspection
The amount of water accumulated in the sedimenter exceeds the rated amount.
Have the vehicle checked by a dealer if this indicator stays on.
PCM
Low Washer Fluid
Washer fluid level is low.
Refill the washer fluid.
Front body control module (FBCM)
Engine Coolant Temperature Low
Engine coolant is cold and no warm air is available for heater/defroster. Vehicle can be driven with the indicator on or off. Have the vehicle checked by a dealer if this indicator stays on.
Instrument cluster


Entertainment screen

•  When the entertainment button on the home screen is selected, the entertainment screen is displayed. The following audio functions in the table below are available.
am2zzn00003536

Display content

Function

Traffic Information
If a particular equipment item is not available, the item is not indicated in the center display.
FM
Switches to FM radio screen.
AM
Switches to AM radio screen.
Stitcher
Switches to Stitcher.
Note
•  Stitcher is not displayed in gray even if the connected mobile device is not compatible with Stitcher.
Aha Radio
Switches to Aha radio screen.
Note
•  Aha radio is not displayed in gray even if the connected mobile device is not compatible with Aha radio.
Bluetooth <Device Name>
Switches to Bluetooth® audio screen.
Note
•  If available, the connecting device name is displayed. When Bluetooth® is not available, such as no device is connected, only Bluetooth® is displayed.
USB1 <Device Name>
Switches to USB audio screen.
Note
•  If available, the connecting device name is displayed. When USB1 is not available, such as no device is connected, only USB1 is displayed.
USB2 <Device Name>
Switches to USB audio screen.
Note
•  If available, the connecting device name is displayed. When USB2 is not available, such as no device is connected, only USB2 is displayed.
CD
Switches to CD screen.
AUX
Switches to AUX screen.
DVD
Switches to DVD screen.

Note
•  Items requiring media, such as CDs or AUX, are displayed in gray and not available if connection of the media cannot be detected.


Communication screen

•   SMS (Short Message Service), and Hands-free telephone (HF/TEL) functions can be used.
aaxjjn00003204

Display content

Function

Active Call
Switches to the incoming call screen. (when receiving an incoming call)
Notifications
Switches to the notification screen.
Note
•  When there is no notification, displayed in gray and not available.
Favorites
Switches to the favorite screen.
Contacts
Displays the phone book.
Call History
Displays the call history.
Dial Phoned
Switches to the dial screen for phone number input.
SMS
Switches to the SMS screen.
Setting
Switches ON/OFF of the SMS notification function.

Note
•  If Bluetooth® communication is not established between a mobile device such as a Bluetooth®-enabled smart phone, the functions dependent on the mobile device are displayed in gray and they are not available.
•  IF there any unread notification or SMS, the number of unread messages is displayed beside each item name. The number of missed call is displayed next to “Call History”.


Navigation screen

•  When the navigation button on the home screen is selected, the navigation screen is displayed. Navigation information such as the current position and route guidance to destination is displayed on this screen.


Settings screen

•  The following settings can be changed. For details, refer to the [ENTERTAINMENT SYSTEM] setting function. (See ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY].)
am3zzn00004421

Tab

Reference

AD-Disp
Active driving display setting
Display
Display setting
Safety
Personalization setting function (vehicle setting)
Sound
Sound setting
Clock
Clock setting
Vehicle
Personalization setting function (vehicle setting)
Devices
Bluetooth® pairing
System
System setting


Construction

•  The center display is installed in the center of the dashboard.
•  The center display has a built-in temperature sensor.
am6zzn00004641

Input/output signal table

Terminal

Signal

1A
1B
Ground
1C
1D
1E
1F
1G
ACC
1H
B+
2A
2B
LVDS (+)
2C
2D
LVDS (-)


Fail-safe

•  Not applicable