REFRIGERANT PRESSURE SENSOR INSPECTION [MANUAL AIR CONDITIONER]

id0740a2817400

SKYACTIV-G 2.0, SKYACTIV-G 2.5

1.  Install the manifold gauge.

2.  Verify the high-pressure side reading of the manifold gauge.

3.  Measure the terminal voltage at PCM terminal 2BB, 2AX and 2AJ.

4.  Using the graph below, measure and verify the terminal voltage at 2AX.

5.  Follow the PCM inspection when measuring the other terminal voltages. (See PCM INSPECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

•  Terminal 2BB: Approx. 5 V (Ignition switch on)

•  Terminal 2AJ: 1.0 V or less

―  If the each voltage is not normal, inspect the related wiring harness.

•  If there is any malfunction, replace the related wiring harness.

•  If wiring harness is normal, replace the refrigerant pressure sensor. (See REFRIGERANT PRESSURE SENSOR REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER].)

ac5wzw00002773

SKYACTIV-D 2.2

1.  Install the manifold gauge.

2.  Verify the high-pressure side reading of the manifold gauge.

3.  Measure the terminal voltage at PCM terminal 2BB, 2BH and 2BD.

4.  Using the graph below, measure and verify the terminal voltage at 2BH.

5.  Follow the PCM inspection when measuring the other terminal voltages. (See PCM INSPECTION [SKYACTIV-D 2.2].)

•  Terminal 2BB: Approx. 5 V (Ignition switch on)

•  Terminal 2BD: 1.0 V or less

―  If the each voltage is not normal, inspect the related wiring harness.

•  If there is any malfunction, replace the related wiring harness.

•  If wiring harness is normal, replace the refrigerant pressure sensor. (See REFRIGERANT PRESSURE SENSOR REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER].)

ac5wzw00002774