REAR SEAT CENTER ARMREST REMOVAL/INSTALLATION
id091300812200
Without Rear Seat Warmer System
1. Remove the screw.
am6zzw00012386
|
2. Remove the center armrest hinge cover in the direction of the arrow shown in the figure.
3. Remove the bolt.
am6zzw00012387
|
4. Partially peel back the trim of the center armrest hinge and remove the clip in the direction of arrow (1) shown in the figure.
am6zzw00012481
|
5. Remove the center armrest in the direction of arrow (2) shown in the figure while setting the pins aside.
6. Install in the reverse order of removal.
With Rear Seat Warmer System
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the rear seat back. (LH) (See REAR SEAT BACK REMOVAL/INSTALLATION.)
3. Remove the screw.
am6zzw00012386
|
4. Remove the center armrest hinge cover in the direction of the arrow shown in the figure.
5. Remove the bolt.
am6zzw00012387
|
6. Partially peel back the trim of the center armrest hinge and remove the clip in the direction of arrow (1) shown in the figure.
am6zzw00012481
|
7. Remove the center armrest in the direction of arrow (2) shown in the figure while setting the pins aside.
8. Unzip the zippers.
am6zzw00014001
|
9. Slide the hooks in the order of arrows (1) and (2) shown in the figure to detach them from the rear seat back frame.
am6zzw00014002
|
10. Pull out the wiring harness from the rear seat back and remove the center armrest.
am6zzw00014003
|
11. Install in the reverse order of removal.