FLOOR INSULATOR REMOVAL/INSTALLATION
id091700889000
Driver-side
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the following parts:
- (1) Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (2) Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (3) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (4) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (5) Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)
- (6) Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (7) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [D66M-R, D66MX-R].)
- (8) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (9) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (10) CD player (with CD player) (See CD PLAYER REMOVAL.) (See CD PLAYER INSTALLATION.)
- (11) DVD/CD player (with DVD/CD player) (See DVD/CD PLAYER REMOVAL.) (See DVD/CD PLAYER INSTALLATION.)
- (12) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (13) Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)
- (14) Accelerator pedal (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-D 2.2].) (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)
- (15) Joint cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
3. Partially peel back the floor covering.
4. Remove the tab in the direction of the arrow (1) shown in the figure.
5. Remove the cover in the direction of the arrow (2) shown in the figure.
6. Pull the floor insulator in the direction of the arrow and remove it.
7. Install in the reverse order of removal.
Passenger-side
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the following parts:
- (1) Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (2) Passenger-side side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (3) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (4) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (5) Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION.)
- (6) Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (7) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [D66M-R, D66MX-R].)
- (8) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (9) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (10) CD player (with CD player) (See CD PLAYER REMOVAL.) (See CD PLAYER INSTALLATION.)
- (11) DVD/CD player (with DVD/CD player) (See DVD/CD PLAYER REMOVAL.) (See DVD/CD PLAYER INSTALLATION.)
- (12) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (13) Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)
3. Partially peel back the floor covering.
4. Remove the fastener.
5. Pull the floor insulator in the direction of the arrow and remove it.
6. Install in the reverse order of removal.
