ANTENNA FEEDER NO.1 INSPECTION

id092000812400

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)

2.  Remove the following parts:

(1)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(2)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(3)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(4)  Passenger-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(5)  Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(6)  Meter hood (See METER HOOD REMOVAL/INSTALLATION.)

(7)  Passenger-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(8)  Audio panel (See AUDIO PANEL REMOVAL/INSTALLATION.)

(9)  Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)

3.  Disconnect antenna feeder No.2.

am6zzw00013673

4.  Verify that the continuity between antenna feeder No.1 terminals is as indicated in the table.

•  If not as indicated in the table, replace antenna feeder No.1. (See ANTENNA FEEDER NO.1 REMOVAL/INSTALLATION.)

am6zzw00013519

am6zzw00013520