MAZDA ERA-GLONASS SWITCH INSPECTION

id092200666700

Switch Inspection

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the front map light. (See MAP LIGHT REMOVAL/INSTALLATION.)

3.  Verify that the continuity is as indicated in the table.

am6zzw00015442

am6zzw00015443

•  If not as indicated in the table, replace the mazda era-glonas switch. (See MAZDA ERA-GLONASS SWITCH REMOVAL/INSTALLATION.)

LED Illumination Inspection

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the front map light. (See MAP LIGHT REMOVAL/INSTALLATION.)

3.  Apply battery voltage to mazda era-glonas switch terminal B, and connect terminal H to ground.

am6zzw00015430

•  If the LED does not illuminate, replace the mazda era-glonas switch. (See MAZDA ERA-GLONASS SWITCH REMOVAL/INSTALLATION.)

Indicator Light Illumination Inspection

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the front map light. (See MAP LIGHT REMOVAL/INSTALLATION.)

3.  Apply battery positive voltage and connect the ground to the mazda era-glonas switch terminals and inspect the LED illuminates.

am6zzw00015442

am6zzw00015444

•  If the LED does not illuminate, replace the mazda era-glonas switch. (See MAZDA ERA-GLONASS SWITCH REMOVAL/INSTALLATION.)