DTC U0483:68 [FORWARD SENSING CAMERA (FSC)]


id1502a3011400

Description

Error signal received from auto leveling control module or adaptive LED headlights control module

Detection condition
•  Forward sensing camera (FSC) receives the error signal from the auto leveling control module or adaptive LED headlights control module for 5 s or more.
Fail-safe
•  Inhibits the high beam control (HBC) system.
•  Inhibits the adaptive LED headlights.
Possible cause
•  DTCs are stored in the auto leveling control module or adaptive LED headlights control module.
•  Auto leveling control module or adaptive LED headlights control module malfunction
•  Forward sensing camera (FSC) malfunction
System wiring diagram
Not applicable

Diagnostic Procedure

Step

Inspection

Action

1
VERIFY AUTO LEVELING CONTROL MODULE OR ADAPTIVE LED HEADLIGHTS CONTROL MODULE DTCs
•  Retrieve the adaptive LED headlights system DTCs using the M-MDS.
•  Are any DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
Go to the next step.
2
VERIFY IF MALFUNCTIONING LOCATION IS AUTO LEVELING CONTROL MODULE OR ADAPTIVE LED HEADLIGHTS CONTROL MODULE DEPENDING ON REPEATABILITY
•  Clear the DTC for the forward sensing camera (FSC) using the M-MDS.
•  Switch the ignition ON (engine off or on) and wait for 6.5 s or more.
•  Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.
•  Is the same DTC displayed?
Yes
Replace the auto leveling control module or adaptive LED headlights control module, then go to the next step.
No
Go to Step 4.
3
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear the DTC for the forward sensing camera (FSC) using the M-MDS.
•  Switch the ignition ON (engine off or on) and wait for 6.5 s or more.
•  Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.
•  Is the same DTC displayed?
Yes
Replace the forward sensing camera (FSC), then go to the next step.
No
Go to the next step.
4
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.