DTC U2300:54 [ADAPTIVE LED HEADLIGHTS CONTROL MODULE]
id1502c1002800
|
System malfunction location |
Error configuration data received from instrument cluster |
|---|---|
|
Detection condition
|
• The adaptive LED headlights control module received error configuration data from the instrument cluster for 30 s or more with the ignition switched ON (engine off or on).
|
|
Fail-safe
|
• When the setting is on using the personalization feature, the headlights HI turn on. (When setting is off using personalization feature, headlight HI illumination on/off depends on control by front body control module (FBCM))
• Control of the headlight auto leveling system is continued.
|
|
Possible cause
|
• DTCs are stored in the instrument cluster.
• Instrument cluster configuration data error
• Adaptive LED headlights control module malfunction
|
|
System wiring diagram
|
—
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY INSTRUMENT CLUSTER DTCs
• Perform the DTC inspection for the instrument cluster using the M-MDS.
• Is the DTC displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
2
|
RESET INSTRUMENT CLUSTER CONFIGURATION DATA
• Using the M-MDS, perform the instrument cluster configuration with the As-Built data.
• Clear the adaptive LED headlights control module DTCs using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 30 s or more.
• Perform the DTC inspection for the adaptive LED headlights control module using the M-MDS.
• Is the DTC U2300:54 displayed?
|
Yes
|
Replace the adaptive LED headlights control module, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||