DTC U3000:42 [ADAPTIVE LED HEADLIGHTS CONTROL MODULE]


id1502c1003100

System malfunction location

Adaptive LED headlights control module internal malfunction

Detection condition
•  Malfunction in the adaptive LED headlights control module internal EEPROM is detected.
Fail-safe
•  When the setting is on using the personalization feature, the headlights HI turn on. (When setting is off using personalization feature, headlight HI illumination on/off depends on control by front body control module (FBCM))
•  The headlight leveling actuator is stopped at the position when the malfunction is determined.
Possible cause
•  Adaptive LED headlights control module internal malfunction
System wiring diagram

Diagnostic Procedure

Step

Inspection

Action

1
PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS ADAPTIVE LED HEADLIGHTS CONTROL MODULE
•  Clear the adaptive LED headlights control module DTCs using the M-MDS.
•  Perform the DTC inspection for the adaptive LED headlights control module using the M-MDS.
•  Is DTC U3000:42 displayed?
Yes
Replace the adaptive LED headlights control module, then go to the next step.
No
Go to the next step.
2
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.