DTC TABLE [SAS CONTROL MODULE]

• When DTCs not shown in the DTC table are displayed, perform the inspection for DTCs not shown in the DTC table. (See Inspection for DTCs not usually displayed so the related function is not equipped.)

DTC	System malfunction location	Fail-safe function	Drive cycle	Self test type^*1	Memory function	Page
B0001:11	19		18	Driver-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A [SAS CONTROL MODULE].)
B0001:12	Driver-side air bag module circuit short to power supply	—	—	C, D	×
B0001:13	Driver-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0001:19	Short circuit to driver-side air bag module and other air bag module circuits	—	—	C, D	×
B0001:1A	Driver-side air bag module circuit resistance low	—	—	C, D	×
B0001:55	Configuration setting error (driver-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE].)
[B0002:11]	19		18	Driver-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0002:12]	Driver-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0002:13]	Driver-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0002:19]	Short circuit to driver-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0002:1A]	Driver-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0002:55]	Configuration setting error (driver-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
B0003:53	―	Flashing	4	Operation (deployment) inhibited	—	—	C, D	×	(See DTC B0003:53 [SAS CONTROL MODULE].)
B0010:11	21		17	Passenger-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A [SAS CONTROL MODULE].)
B0010:12	Passenger-side air bag module circuit short to power supply	—	—	C, D	×
B0010:13	Passenger-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0010:19	Short circuit to passenger-side air bag module and other air bag module circuits	—	—	C, D	×
B0010:1A	Passenger-side air bag module circuit resistance low	—	—	C, D	×
B0010:55	Configuration setting error (passenger-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE].)
[B0011:11]	21		17	Passenger-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0011:12]	Passenger-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0011:13]	Passenger-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0011:19]	Short circuit to passenger-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0011:1A]	Passenger-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0011:55]	Configuration setting error (passenger-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
[B0052:09]	52		27	Passenger-side buckle switch undefined	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0052:11]	Passenger-side buckle switch circuit open or short to power supply	—	—	C, D	×
[B0052:14]	Passenger-side buckle switch circuit short to body ground	—	—	C, D	×
[B0072:11]	34		19	Passenger-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0072:12]	Passenger-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B0072:13]	Passenger-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B0072:19]	Short circuit to passenger-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B0072:1A]	Passenger-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B0072:55]	Configuration setting error (passenger-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B0094:11	42		10	Crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B0094:11/B0094:13/B0094:87/B0094:96 [SAS CONTROL MODULE]f.)
B0094:13	Crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
B0094:87	Signal reception error from crash zone sensor	—	—	C, D	×
B0094:96	Crash zone sensor internal malfunction	—	—	C, D	×
B0094:55	Configuration setting error (crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55 [SAS CONTROL MODULE].)
[B00A0:07]	16		28	Seat weight sensor collision detection	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00A0:09]	Seat weight sensor or occupant classification sensor control module internal malfunction	—	—	C, D	×
[B00A0:1C]	Seat weight sensor control module circuit open circuit	—	—	C, D	×
[B00A0:28]	Seat weight sensor or occupant classification sensor calibration setting invalid	—	—	D	×
[B00A0:4A]	15		6	Seat weight sensor or occupant classification sensor ID mismatch	—	—	C, D	×
[B00A0:54]	16		28	Seat weight sensor or occupant classification sensor calibration setting not set	—	—	C, D	×
[B00A0:81]	Invalid signal received from seat weight sensor or occupant classification sensor	—	—	C, D	×
[B00A0:87]	No signal received from seat weight sensor or occupant classification sensor	—	—	C, D	×
[B00A0:8F]	Seat weight sensor communication line malfunction	—	—	C, D	×
[B00B5:11]	49		30	Driver-side seat position sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00B5:12]	Driver-side seat position sensor circuit short to power supply	—	—	C, D	×
[B00B5:13]	Driver-side seat position sensor circuit open circuit or resistance high	—	—	C, D	×
[B00B5:1D]	Driver-side seat position sensor circuit resistance not within specification	—	—	C, D	×
[B00B5:55]	Configuration setting error (driver-side seat position sensor structural malfunction)	—	—	C, D	×
[B00C0:93]	16		28	Seat weight sensor or occupant classification sensor malfunction	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00C1:93]	Seat weight sensor or occupant classification sensor malfunction	—	—	C, D	×
[B00C2:93]	Seat weight sensor malfunction	—	—	C, D	×
[B00C3:93]	Seat weight sensor malfunction	—	—	C, D	×
B00D2:01	14		5	Air bag system warning light malfunction	—	—	C, D	×	(See DTC B00D2:01 [SAS CONTROL MODULE].)
B00D2:29	Communication error with instrument cluster (air bag system warning light status mis-matched)	—	—	C, D	×	(See DTC B00D2:29 [SAS CONTROL MODULE].)
B00D5:01	18		29	PAD OFF indicator circuit open circuit or short to power supply	—	—	C, D	×	(See DTC B00D5:01/B1202:01 [SAS CONTROL MODULE].)
B00D5:29	Communication error with instrument cluster (PAD indicator light status mis-matched)	—	—	C, D	×	(See DTC B00D5:29 [SAS CONTROL MODULE].)
B1011:95	58		8	SAS control module connectors are poorly connected	—	—	C, D	×	(See DTC B1011:95 [SAS CONTROL MODULE].)
B10FD:11	43		14	Driver-side side air bag sensor circuit short to body ground or power supply	—	—	C, D	×	(See DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96 [SAS CONTROL MODULE].)
B10FD:13	Driver-side side air bag sensor circuit open circuit or resistance high	—	—	C, D	×
B10FD:87	Signal reception error from driver-side side air bag sensor	—	—	C, D	×
B10FD:96	Driver-side side air bag sensor internal malfunction	—	—	C, D	×
B10FD:55	Configuration setting error (driver-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE].)
B10FE:11	44		13	Passenger-side side air bag sensor circuit short to body ground or power supply	—	—	C, D	×	(See DTC B10FE:11/B10FE:13/B10FE:87/B10FE:96 [SAS CONTROL MODULE].)
B10FE:13	Passenger-side side air bag sensor circuit open circuit or resistance high	—	—	C, D	×
B10FE:87	Signal reception error from passenger-side side air bag sensor	—	—	C, D	×
B10FE:96	Passenger-side side air bag sensor internal malfunction	—	—	C, D	×
B10FE:55	Configuration setting error (passenger-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE].)
B1126:11	22		24	Driver-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A [SAS CONTROL MODULE].)
B1126:12	Driver-side side air bag module circuit short to power supply	—	—	C, D	×
B1126:13	Driver-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1126:19	Short circuit to driver-side side air bag module and other air bag module circuits	—	—	C, D	×
B1126:1A	Driver-side side air bag module circuit resistance low	—	—	C, D	×
B1126:55	Configuration setting error (driver-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE].)
B1127:11	23		23	Passenger-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A [SAS CONTROL MODULE].)
B1127:12	Passenger-side side air bag module circuit short to power supply	—	—	C, D	×
B1127:13	Passenger-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1127:19	Short circuit to passenger-side side air bag module and other air bag module circuits	—	—	C, D	×
B1127:1A	Passenger-side side air bag module circuit resistance low	—	—	C, D	×
B1127:55	Configuration setting error (passenger-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE].)
B1128:11	24		26	Driver-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A [SAS CONTROL MODULE].)
B1128:12	Driver-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1128:13	Driver-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1128:19	Short circuit to driver-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1128:1A	Driver-side curtain air bag module circuit resistance low	—	—	C, D	×
B1128:55	Configuration setting error (driver-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE].)
B1129:11	25		25	Passenger-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A [SAS CONTROL MODULE].)
B1129:12	Passenger-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1129:13	Passenger-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1129:19	Short circuit to passenger-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1129:1A	Passenger-side curtain air bag module circuit resistance low	—	—	C, D	×
B1129:55	Configuration setting error (passenger-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE].)
B1193:00	13		3	SAS control module operation (deployment)	—	—	C, D	×	(See DTC B1193:00 [SAS CONTROL MODULE].)
[B1196:11]	45		16	Driver-side side air bag sensor No.2 circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1196:13]	Driver-side side air bag sensor No.2 circuit open circuit or short to power supply	—	—	C, D	×
[B1196:87]	Signal reception error from driver-side side air bag sensor No.2	—	—	C, D	×
[B1196:96]	Driver-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
[B1196:55]	Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×
[B1197:11]	46		15	Passenger-side side air bag sensor No.2 circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1197:13]	Passenger-side side air bag sensor No.2 circuit open circuit or short to power supply	—	—	C, D	×
[B1197:87]	Signal reception error from passenger-side side air bag sensor No.2	—	—	C, D	×
[B1197:96]	Passenger-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
[B1197:55]	Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×
B1202:01	18		29	PAD ON indicator circuit open circuit or short to power supply	—	—	C, D	×	(See DTC B00D5:01/B1202:01 [SAS CONTROL MODULE].)
B1206:00	―	―	―	SAS control module collision judgement signal output (fuel cut signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE].)
B1211:11	38		22	Driver-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A [SAS CONTROL MODULE].)
B1211:12	Driver-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1211:13	Driver-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1211:19	Short circuit to driver-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1211:1A	Driver-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1211:55	Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE].)
B1214:11	39		21	Passenger-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A [SAS CONTROL MODULE].)
B1214:12	Passenger-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1214:13	Passenger-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1214:19	Short circuit to passenger-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1214:1A	Passenger-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1214:55	Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE].)
[B1226:11]	36		12	Driver-side pressure sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1226:13]	Driver-side pressure sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1226:87]	Signal reception error from driver-side pressure sensor	—	—	C, D	×
[B1226:96]	Driver-side pressure sensor internal malfunction	—	—	C, D	×
[B1226:55]	Configuration setting error (driver-side pressure sensor structural malfunction)	—	—	C, D	×
[B1227:11]	37		11	Passenger-side pressure sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1227:13]	Passenger-side pressure sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1227:87]	Signal reception error from passenger-side pressure sensor	—	—	C, D	×
[B1227:96]	Passenger-side pressure sensor internal malfunction	—	—	C, D	×
[B1227:55]	Configuration setting error (passenger-side pressure sensor structural malfunction)	—	—	C, D	×
[B1228:11]	35		20	Driver-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1228:12]	Driver-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1228:13]	Driver-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1228:19]	Short circuit to driver-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1228:1A]	Driver-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1228:55]	Configuration setting error (driver-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
[B1417:11]	41		9	Passenger-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1417:13]	Passenger-side crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1417:87]	Signal reception error from passenger-side crash zone sensor	—	—	C, D	×
[B1417:96]	Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
[B1417:55]	Configuration setting error (passenger-side crash zone sensor structural malfunction)	—	—	C, D	×
B143A:00	―	―	―	SAS control module collision judgement signal output (collision detection signal output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE].)
B1A55:00	―	―	―	SAS control module collision judgement signal output (collision detection signal for MAZDA ERA-GLONASS output)	—	—	C, D	×
B1D75:55	56		31	Configuration setting error (PAD switch structural malfunction)	—	—	C, D	×	(See DTC B1D75:55 [SAS CONTROL MODULE].)
B1D75:62	PAD switch circuit open circuit or short to body ground	—	—	C, D	×	(See DTC B1D75:62 [SAS CONTROL MODULE].)
C0061:29	―	―	―	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	C, D	×	(See DTC C0061:29/C0062:29/C0063:29/P0666:29 [SAS CONTROL MODULE].)
C0062:29	Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	C, D	×
C0063:29	Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
P0666:29	Temperature sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
U0001:88	14		5	Unit communication error (HS-CAN)	—	—	C, D	×	(See DTC U0001:88/U0155:00 [SAS CONTROL MODULE].)
U0155:00	Communication error with instrument cluster	—	—	C, D	×
U0300:00	54		7	Configuration setting invalid	—	—	C, D	×	(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE].)
U2005:68	14		5	PCM communication error (vehicle speed signal)	—	—	C, D	×	(See DTC U2005:68 [SAS CONTROL MODULE].)
U2100:00	―	Flashing	4	Configuration not set	—	—	C, D	×	(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE].)
U2107:00	―	―	―	SAS control module collision judgement signal output (ESS signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE].)
U3000:49	12		2	SAS control module internal malfunction	—	—	C, D	×	(See DTC U3000:49 [SAS CONTROL MODULE].)
U3003:16	―	Continuously illuminated	1	SAS control module power supply voltage decreases (8 V or less)	—	—	C, D	×	(See DTC U3003:16/U3003:17 [SAS CONTROL MODULE].)
U3003:17	SAS control module power supply voltage increases (18 V or more)	—	—	C, D	×

DTC

System malfunction location

Fail-safe function

Drive cycle

Self test type^*1

Memory function

Page

M-MDS display

Air bag system warning light

Flashing pattern

Priority ranking

B0001:11

Driver-side air bag module circuit short to body ground

—

C, D

(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A [SAS CONTROL MODULE].)

B0001:12

Driver-side air bag module circuit short to power supply

—

C, D

B0001:13

Driver-side air bag module circuit open circuit or resistance high

—

C, D

B0001:19

Short circuit to driver-side air bag module and other air bag module circuits

—

C, D

B0001:1A

Driver-side air bag module circuit resistance low

—

C, D

B0001:55

Configuration setting error (driver-side air bag module structural malfunction)

—

C, D

(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE].)

[B0002:11]

Driver-side air bag module (inflator No.2) circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B0002:12]

Driver-side air bag module (inflator No.2) circuit short to power supply

—

C, D

[B0002:13]

Driver-side air bag module (inflator No.2) circuit open circuit or resistance high

—

C, D

[B0002:19]

Short circuit to driver-side air bag module (inflator No.2) and other air bag module circuits

—

C, D

[B0002:1A]

Driver-side air bag module (inflator No.2) circuit resistance low

—

C, D

[B0002:55]

Configuration setting error (driver-side air bag module (inflator No.2) structural malfunction)

—

C, D

B0003:53

―

Flashing

Operation (deployment) inhibited

—

C, D

(See DTC B0003:53 [SAS CONTROL MODULE].)

B0010:11

Passenger-side air bag module circuit short to body ground

—

C, D

(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A [SAS CONTROL MODULE].)

B0010:12

Passenger-side air bag module circuit short to power supply

—

C, D

B0010:13

Passenger-side air bag module circuit open circuit or resistance high

—

C, D

B0010:19

Short circuit to passenger-side air bag module and other air bag module circuits

—

C, D

B0010:1A

Passenger-side air bag module circuit resistance low

—

C, D

B0010:55

Configuration setting error (passenger-side air bag module structural malfunction)

—

C, D

(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE].)

[B0011:11]

Passenger-side air bag module (inflator No.2) circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B0011:12]

Passenger-side air bag module (inflator No.2) circuit short to power supply

—

C, D

[B0011:13]

Passenger-side air bag module (inflator No.2) circuit open circuit or resistance high

—

C, D

[B0011:19]

Short circuit to passenger-side air bag module (inflator No.2) and other air bag module circuits

—

C, D

[B0011:1A]

Passenger-side air bag module (inflator No.2) circuit resistance low

—

C, D

[B0011:55]

Configuration setting error (passenger-side air bag module (inflator No.2) structural malfunction)

—

C, D

[B0052:09]

Passenger-side buckle switch undefined

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B0052:11]

Passenger-side buckle switch circuit open or short to power supply

—

C, D

[B0052:14]

Passenger-side buckle switch circuit short to body ground

—

C, D

[B0072:11]

Passenger-side lap pre-tensioner seat belt circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B0072:12]

Passenger-side lap pre-tensioner seat belt circuit short to power supply

—

C, D

[B0072:13]

Passenger-side lap pre-tensioner seat belt circuit open circuit or resistance high

—

C, D

[B0072:19]

Short circuit to passenger-side lap pre-tensioner seat belt and other air bag module circuits

—

C, D

[B0072:1A]

Passenger-side lap pre-tensioner seat belt circuit resistance low

—

C, D

[B0072:55]

Configuration setting error (passenger-side lap pre-tensioner seat belt structural malfunction)

—

C, D

B0094:11

Crash zone sensor circuit short to body ground

—

C, D

(See DTC B0094:11/B0094:13/B0094:87/B0094:96 [SAS CONTROL MODULE]f.)

B0094:13

Crash zone sensor circuit open circuit or short to power supply

—

C, D

B0094:87

Signal reception error from crash zone sensor

—

C, D

B0094:96

Crash zone sensor internal malfunction

—

C, D

B0094:55

Configuration setting error (crash zone sensor structural malfunction)

—

C, D

(See DTC B0094:55 [SAS CONTROL MODULE].)

[B00A0:07]

Seat weight sensor collision detection

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B00A0:09]

Seat weight sensor or occupant classification sensor control module internal malfunction

—

C, D

[B00A0:1C]

Seat weight sensor control module circuit open circuit

—

C, D

[B00A0:28]

Seat weight sensor or occupant classification sensor calibration setting invalid

—

[B00A0:4A]

Seat weight sensor or occupant classification sensor ID mismatch

—

C, D

[B00A0:54]

Seat weight sensor or occupant classification sensor calibration setting not set

—

C, D

[B00A0:81]

Invalid signal received from seat weight sensor or occupant classification sensor

—

C, D

[B00A0:87]

No signal received from seat weight sensor or occupant classification sensor

—

C, D

[B00A0:8F]

Seat weight sensor communication line malfunction

—

C, D

[B00B5:11]

Driver-side seat position sensor circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B00B5:12]

Driver-side seat position sensor circuit short to power supply

—

C, D

[B00B5:13]

Driver-side seat position sensor circuit open circuit or resistance high

—

C, D

[B00B5:1D]

Driver-side seat position sensor circuit resistance not within specification

—

C, D

[B00B5:55]

Configuration setting error (driver-side seat position sensor structural malfunction)

—

C, D

[B00C0:93]

Seat weight sensor or occupant classification sensor malfunction

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B00C1:93]

Seat weight sensor or occupant classification sensor malfunction

—

C, D

[B00C2:93]

Seat weight sensor malfunction

—

C, D

[B00C3:93]

Seat weight sensor malfunction

—

C, D

B00D2:01

Air bag system warning light malfunction

—

C, D

(See DTC B00D2:01 [SAS CONTROL MODULE].)

B00D2:29

Communication error with instrument cluster (air bag system warning light status mis-matched)

—

C, D

(See DTC B00D2:29 [SAS CONTROL MODULE].)

B00D5:01

PAD OFF indicator circuit open circuit or short to power supply

—

C, D

(See DTC B00D5:01/B1202:01 [SAS CONTROL MODULE].)

B00D5:29

Communication error with instrument cluster (PAD indicator light status mis-matched)

—

C, D

(See DTC B00D5:29 [SAS CONTROL MODULE].)

B1011:95

SAS control module connectors are poorly connected

—

C, D

(See DTC B1011:95 [SAS CONTROL MODULE].)

B10FD:11

Driver-side side air bag sensor circuit short to body ground or power supply

—

C, D

(See DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96 [SAS CONTROL MODULE].)

B10FD:13

Driver-side side air bag sensor circuit open circuit or resistance high

—

C, D

B10FD:87

Signal reception error from driver-side side air bag sensor

—

C, D

B10FD:96

Driver-side side air bag sensor internal malfunction

—

C, D

B10FD:55

Configuration setting error (driver-side side air bag sensor structural malfunction)

—

C, D

(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE].)

B10FE:11

Passenger-side side air bag sensor circuit short to body ground or power supply

—

C, D

(See DTC B10FE:11/B10FE:13/B10FE:87/B10FE:96 [SAS CONTROL MODULE].)

B10FE:13

Passenger-side side air bag sensor circuit open circuit or resistance high

—

C, D

B10FE:87

Signal reception error from passenger-side side air bag sensor

—

C, D

B10FE:96

Passenger-side side air bag sensor internal malfunction

—

C, D

B10FE:55

Configuration setting error (passenger-side side air bag sensor structural malfunction)

—

C, D

(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE].)

B1126:11

Driver-side side air bag module circuit short to body ground

—

C, D

(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A [SAS CONTROL MODULE].)

B1126:12

Driver-side side air bag module circuit short to power supply

—

C, D

B1126:13

Driver-side side air bag module circuit open circuit or resistance high

—

C, D

B1126:19

Short circuit to driver-side side air bag module and other air bag module circuits

—

C, D

B1126:1A

Driver-side side air bag module circuit resistance low

—

C, D

B1126:55

Configuration setting error (driver-side side air bag module structural malfunction)

—

C, D

(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE].)

B1127:11

Passenger-side side air bag module circuit short to body ground

—

C, D

(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A [SAS CONTROL MODULE].)

B1127:12

Passenger-side side air bag module circuit short to power supply

—

C, D

B1127:13

Passenger-side side air bag module circuit open circuit or resistance high

—

C, D

B1127:19

Short circuit to passenger-side side air bag module and other air bag module circuits

—

C, D

B1127:1A

Passenger-side side air bag module circuit resistance low

—

C, D

B1127:55

Configuration setting error (passenger-side side air bag module structural malfunction)

—

C, D

(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE].)

B1128:11

Driver-side curtain air bag module circuit short to body ground

—

C, D

(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A [SAS CONTROL MODULE].)

B1128:12

Driver-side curtain air bag module circuit short to power supply

—

C, D

B1128:13

Driver-side curtain air bag module circuit open circuit or resistance high

—

C, D

B1128:19

Short circuit to driver-side curtain air bag module and other air bag module circuits

—

C, D

B1128:1A

Driver-side curtain air bag module circuit resistance low

—

C, D

B1128:55

Configuration setting error (driver-side curtain air bag module structural malfunction)

—

C, D

(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE].)

B1129:11

Passenger-side curtain air bag module circuit short to body ground

—

C, D

(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A [SAS CONTROL MODULE].)

B1129:12

Passenger-side curtain air bag module circuit short to power supply

—

C, D

B1129:13

Passenger-side curtain air bag module circuit open circuit or resistance high

—

C, D

B1129:19

Short circuit to passenger-side curtain air bag module and other air bag module circuits

—

C, D

B1129:1A

Passenger-side curtain air bag module circuit resistance low

—

C, D

B1129:55

Configuration setting error (passenger-side curtain air bag module structural malfunction)

—

C, D

(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE].)

B1193:00

SAS control module operation (deployment)

—

C, D

(See DTC B1193:00 [SAS CONTROL MODULE].)

[B1196:11]

Driver-side side air bag sensor No.2 circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1196:13]

Driver-side side air bag sensor No.2 circuit open circuit or short to power supply

—

C, D

[B1196:87]

Signal reception error from driver-side side air bag sensor No.2

—

C, D

[B1196:96]

Driver-side side air bag sensor No.2 internal malfunction

—

C, D

[B1196:55]

Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)

—

C, D

[B1197:11]

Passenger-side side air bag sensor No.2 circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1197:13]

Passenger-side side air bag sensor No.2 circuit open circuit or short to power supply

—

C, D

[B1197:87]

Signal reception error from passenger-side side air bag sensor No.2

—

C, D

[B1197:96]

Passenger-side side air bag sensor No.2 internal malfunction

—

C, D

[B1197:55]

Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)

—

C, D

B1202:01

PAD ON indicator circuit open circuit or short to power supply

—

C, D

(See DTC B00D5:01/B1202:01 [SAS CONTROL MODULE].)

B1206:00

―

SAS control module collision judgement signal output (fuel cut signal output)

―

C, D

(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE].)

B1211:11

Driver-side pre-tensioner seat belt circuit short to body ground

—

C, D

(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A [SAS CONTROL MODULE].)

B1211:12

Driver-side pre-tensioner seat belt circuit short to power supply

—

C, D

B1211:13

Driver-side pre-tensioner seat belt circuit open circuit or resistance high

—

C, D

B1211:19

Short circuit to driver-side pre-tensioner seat belt and other air bag module circuits

—

C, D

B1211:1A

Driver-side pre-tensioner seat belt circuit resistance low

—

C, D

B1211:55

Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)

—

C, D

(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE].)

B1214:11

Passenger-side pre-tensioner seat belt circuit short to body ground

—

C, D

(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A [SAS CONTROL MODULE].)

B1214:12

Passenger-side pre-tensioner seat belt circuit short to power supply

—

C, D

B1214:13

Passenger-side pre-tensioner seat belt circuit open circuit or resistance high

—

C, D

B1214:19

Short circuit to passenger-side pre-tensioner seat belt and other air bag module circuits

—

C, D

B1214:1A

Passenger-side pre-tensioner seat belt circuit resistance low

—

C, D

B1214:55

Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)

—

C, D

(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE].)

[B1226:11]

Driver-side pressure sensor circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1226:13]

Driver-side pressure sensor circuit open circuit or short to power supply

—

C, D

[B1226:87]

Signal reception error from driver-side pressure sensor

—

C, D

[B1226:96]

Driver-side pressure sensor internal malfunction

—

C, D

[B1226:55]

Configuration setting error (driver-side pressure sensor structural malfunction)

—

C, D

[B1227:11]

Passenger-side pressure sensor circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1227:13]

Passenger-side pressure sensor circuit open circuit or short to power supply

—

C, D

[B1227:87]

Signal reception error from passenger-side pressure sensor

—

C, D

[B1227:96]

Passenger-side pressure sensor internal malfunction

—

C, D

[B1227:55]

Configuration setting error (passenger-side pressure sensor structural malfunction)

—

C, D

[B1228:11]

Driver-side lap pre-tensioner seat belt circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1228:12]

Driver-side lap pre-tensioner seat belt circuit short to power supply

—

C, D

[B1228:13]

Driver-side lap pre-tensioner seat belt circuit open circuit or resistance high

—

C, D

[B1228:19]

Short circuit to driver-side lap pre-tensioner seat belt and other air bag module circuits

—

C, D

[B1228:1A]

Driver-side lap pre-tensioner seat belt circuit resistance low

—

C, D

[B1228:55]

Configuration setting error (driver-side lap pre-tensioner seat belt structural malfunction)

—

C, D

[B1417:11]

Passenger-side crash zone sensor circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1417:13]

Passenger-side crash zone sensor circuit open circuit or short to power supply

—

C, D

[B1417:87]

Signal reception error from passenger-side crash zone sensor

—

C, D

[B1417:96]

Passenger-side crash zone sensor internal malfunction

—

C, D

[B1417:55]

Configuration setting error (passenger-side crash zone sensor structural malfunction)

—

C, D

B143A:00

―

SAS control module collision judgement signal output (collision detection signal output)

—

C, D

(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE].)

B1A55:00

―

SAS control module collision judgement signal output (collision detection signal for MAZDA ERA-GLONASS output)

—

C, D

B1D75:55

Configuration setting error (PAD switch structural malfunction)

—

C, D

(See DTC B1D75:55 [SAS CONTROL MODULE].)

B1D75:62

PAD switch circuit open circuit or short to body ground

—

C, D

(See DTC B1D75:62 [SAS CONTROL MODULE].)

C0061:29

―

Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)

—

C, D

(See DTC C0061:29/C0062:29/C0063:29/P0666:29 [SAS CONTROL MODULE].)

C0062:29

Low-G sensor (forward-G) in SAS control module (internal circuit disabled)

—

C, D

C0063:29

Yaw rate sensor in SAS control module (internal circuit disabled)

—

C, D

P0666:29

Temperature sensor in SAS control module (internal circuit disabled)

—

C, D

U0001:88

Unit communication error (HS-CAN)

—

C, D

(See DTC U0001:88/U0155:00 [SAS CONTROL MODULE].)

U0155:00

Communication error with instrument cluster

—

C, D

U0300:00

Configuration setting invalid

—

C, D

(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE].)

U2005:68

PCM communication error (vehicle speed signal)

—

C, D

(See DTC U2005:68 [SAS CONTROL MODULE].)

U2100:00

―

Flashing

Configuration not set

—

C, D

(See DTC U0300:00/U2100:00 [SAS CONTROL MODULE].)

U2107:00

―

SAS control module collision judgement signal output (ESS signal output)

―

C, D

(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE].)

U3000:49

SAS control module internal malfunction

—

C, D

(See DTC U3000:49 [SAS CONTROL MODULE].)

U3003:16

―

Continuously illuminated

SAS control module power supply voltage decreases (8 V or less)

—

C, D

(See DTC U3003:16/U3003:17 [SAS CONTROL MODULE].)

U3003:17

SAS control module power supply voltage increases (18 V or more)

—

C, D

Step	Inspection		Action
1	INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY • Is any DTC not within [ ] in the DTC table displayed simultaneously?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].)
No	Go to the next step.
2	PERFORM SAS CONTROL MODULE DTC INSPECTION • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE].) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE].) • Are the same DTCs displayed?	Yes	Go to the next step.
No	If DTC is displayed • Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].) If DTC is not displayed • DTC troubleshooting completed.
3	PERFORM SAS CONTROL MODULE CONFIGURATION (AS-BUILT DATA USE) • Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA).) • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE].) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE].) • Are the same DTCs displayed?	Yes	Go to the next step.
No	If DTC is displayed • Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].) If DTC is not displayed • DTC troubleshooting completed.
4	PERFORM SAS CONTROL MODULE DTC INSPECTION • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE].) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE].) • Are the same DTCs displayed?	Yes	Repeat the inspection from Step 2. • If the malfunction recurs, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)
No	If DTC is displayed • Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].) If DTC is not displayed • DTC troubleshooting completed.

Step

Inspection

Action

INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY

• Is any DTC not within [ ] in the DTC table displayed simultaneously?

Yes

Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].)

Go to the next step.

PERFORM SAS CONTROL MODULE DTC INSPECTION

• Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE].)

• Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE].)

• Are the same DTCs displayed?

Yes

Go to the next step.

If DTC is displayed

• Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].)

If DTC is not displayed

• DTC troubleshooting completed.

PERFORM SAS CONTROL MODULE CONFIGURATION (AS-BUILT DATA USE)

• Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA).)

• Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE].)

• Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE].)

• Are the same DTCs displayed?

Yes

Go to the next step.

If DTC is displayed

• Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].)

If DTC is not displayed

• DTC troubleshooting completed.

PERFORM SAS CONTROL MODULE DTC INSPECTION

• Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE].)

• Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE].)

• Are the same DTCs displayed?

Yes

Repeat the inspection from Step 2.

• If the malfunction recurs, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)

If DTC is displayed

• Repair the malfunctioning part according to the applicable DTC troubleshooting.(See DTC TABLE [SAS CONTROL MODULE].)

If DTC is not displayed

• DTC troubleshooting completed.